The part about head cleaning says "high purity" isopropyl alcohol and then says 70-99%. There's little reason to buy anything other than 99%. Additionally some of the same cleaning swabs and wipes sold for fiber optic patch cable and bulkhead connector cleaning are well suited for this.
These are low cost generic/bulk items you can buy from chinese sellers via Amazon or other sources. If it's good enough to clean 9/125 singlemode fiber it should be good enough for floppy drive heads. Ignore the reel-type cleaners that look like a mini betamax tape, and the push click cleaners, which can only be used on real fiber stuff. Go for the swabs and kimtech wipes.
You should actually dilute it to about 70% with distilled water. It helps penetrate cell membranes and destroy them. You'd be surprised how much fungus and other nasty stuff appears over and inside old tech. I deal with camera lenses myself.
But yeah just buy the 99% stuff and some distilled water and do it yourself. You can wash down with distilled water too so having a few litres lying around is quite handy.
Not sure why my parents chose to put a floppy disk driver on a desktop computer bought in 2006 (perhaps some seller was very convincing?), but I thought it was cool, so I used it sometimes. It was also cheaper than USB-sticks -and less likely to lose
I would like to see approaches to recovering data from fragile disks by placing the inner disk on a flat surface and using some kind of imaging technology to measure the magnetic fields - perhaps an electron microscope could do the job at low enough field strengths?
Using this I imagine it might be possible to not only read the disk data, but perhaps even previous versions of data that has been overwritten.
When I moved out from my parents I took a box with aprox 100 floppies. I was pleasently surprised when only 2 were unreadeable all others were ok.
The other box with CDs had a much higher "fault rate". Go figure.
What it actually takes is taking the floppy disc out, cleaning any mold on it, putting it back in the case, and then using greaseweazle to image the magnetic flux of the disc.
Preserving old original floppy disks may be useful, for several reasons, but I myself got rid of all my floppy disks many years ago when USB sticks became viable; even ages ago already, e. g. using CDs and DVDs getting rid of floppy disks - so actually those USB devices killed my use case for floppy disks, CDs and DVDs. I still like DVDs but having USB sticks is simply more convenient in the long run.
The internally linked article is much better than this https://www.digipres.org/the-floppy-guide/
The part about head cleaning says "high purity" isopropyl alcohol and then says 70-99%. There's little reason to buy anything other than 99%. Additionally some of the same cleaning swabs and wipes sold for fiber optic patch cable and bulkhead connector cleaning are well suited for this.
These are low cost generic/bulk items you can buy from chinese sellers via Amazon or other sources. If it's good enough to clean 9/125 singlemode fiber it should be good enough for floppy drive heads. Ignore the reel-type cleaners that look like a mini betamax tape, and the push click cleaners, which can only be used on real fiber stuff. Go for the swabs and kimtech wipes.
visual examples of what the products look like:
https://focenter.com/products/fiber-optic-cleaning/productio...
https://www.occfiber.com/product/kimtech-lint-free-wipes/
You should actually dilute it to about 70% with distilled water. It helps penetrate cell membranes and destroy them. You'd be surprised how much fungus and other nasty stuff appears over and inside old tech. I deal with camera lenses myself.
But yeah just buy the 99% stuff and some distilled water and do it yourself. You can wash down with distilled water too so having a few litres lying around is quite handy.
Mostly everyone over 40, and even some younger ones, still have some old floppy disks with files that may or may not be of value.
Somewhere in my mother's house, there still is (hopefully) a floppy disk from 2006-2007 with my teenage self's diary. I wish it is preserved
I had my Tools disk and my MSDOS gaming boot disk, tweaked and tuned to perfection.
Those were the best of times.
Little me didn't know that was the gateway drug to coding.
Surprised you were still using a floppy disk in 2006-2007! You have decent odds, that’s pretty young for one.
Not sure why my parents chose to put a floppy disk driver on a desktop computer bought in 2006 (perhaps some seller was very convincing?), but I thought it was cool, so I used it sometimes. It was also cheaper than USB-sticks -and less likely to lose
I would like to see approaches to recovering data from fragile disks by placing the inner disk on a flat surface and using some kind of imaging technology to measure the magnetic fields - perhaps an electron microscope could do the job at low enough field strengths?
Using this I imagine it might be possible to not only read the disk data, but perhaps even previous versions of data that has been overwritten.
Magnetic field cameras exist:
https://matesy.de/en/products/cmos-magview
https://en.wikipedia.org/wiki/File:Visualization_of_magnetic...
[dead]
When I moved out from my parents I took a box with aprox 100 floppies. I was pleasently surprised when only 2 were unreadeable all others were ok. The other box with CDs had a much higher "fault rate". Go figure.
What it actually takes is taking the floppy disc out, cleaning any mold on it, putting it back in the case, and then using greaseweazle to image the magnetic flux of the disc.
Preserving old original floppy disks may be useful, for several reasons, but I myself got rid of all my floppy disks many years ago when USB sticks became viable; even ages ago already, e. g. using CDs and DVDs getting rid of floppy disks - so actually those USB devices killed my use case for floppy disks, CDs and DVDs. I still like DVDs but having USB sticks is simply more convenient in the long run.
The longevity of NAND flash is still very questionable, particularly modern high-density TLC/QLC:
https://news.ycombinator.com/item?id=43739028
SLC and early MLC should be OK for at least a few decades if not very worn, however
Indeed, some create master disk images with forensic tools, and physical drives:
https://github.com/keirf/greaseweazle
Then use clean disk images on USB floppy emulators for old equipment:
https://github.com/keirf/flashfloppy
It is rare to need these tools, but for some folks it is important. =3
[flagged]